PRODUCTS
SUPER BASE Films are one side coated PET Film with special proprietory coating for high bonding. This films are used as a Base Substrate for Liquid....
Cover film is transparent and very thin film specially prepared for making rubber stamps.
MOUNTING PLATES are thick PET film for mounting polymer plates
LIQUID PHOTOPOLYMER
Also we have.. LX-125
LX-132
(For printing on corrugation board, paper.)
(For printing on corrugation board, paper.)
DESCRIPTION
SKYTONE LX-132 is UV curable resins of 32 durometers (Shore A). The Liquid Photopolymer resins has a same characteristic as that of those found in sheet photopolymer. Plate processed from Skytone 132 is tech free high resilince and sure lint free properties, Excellent solid coverage and easy cleaning of the press. The finished plates are UV resistance and white florosant wil not degrade under room temperature. The durability of plate are very long. The cost of plate processed from liquid photopolymer is effectivery low compare to plate processed from sheet polymer.
* LOW TACK PLATE
Clean running on press
* EXCELLENT PLATE DURABILITY
UV, Heat and humidity stable
* WIDE IMAGING LATITUDE
Easily images a verity of copy
* QUALITY, ECONOMY, ECOLOGY
The benefit of Liquid Photopolymer Resin
| PLATE PROPERTY | LX-125 RESIN |
| Recommended Guage | 1.5mm to 6.5mm |
| Inks Compatibility | Water based |
| Application | Corrugation Printings |
| IMAGE COMPATIBILITY | |
| % Dot area | 2 to 96 |
| Half Tone | 100 Lines per inches |
| Fine Line: Width/Inch | 0.005 (0.127) |
| Isolated Dot/Inch | 0.01 |
| PHYSICAL PROPERTY | |
| Durometer | 32 |
| Abrasion Resistance | Very Good |
| Ozone Resistance | Excellent |
| Specific Gravity | 1.025 |
| Freezing Point | <32°F |
| Cloud Point | 40°F |
| PROCESSING TIME | THICKNESS 2.84mm |
| Face Exposure | 9 Mins |
| Back Exposure | 20 Mins |
| Washout | 10 Mins |
| Drying | 90 Mins |
| Post Exposure | 10 Mins |
| Finishing | 10 Mins |
USES
* For Making Plates to Print on Corrugated Substrate.
* For Making Plates to Print on Paper, Multiwall Bags, Sacks etc.
* For Making Plates to Print on Paper, Multiwall Bags, Sacks etc.
FOR MSDS
